China Best Sales Wide Range Universal Coupling for Different Materials and of Various Outside Diameters universal coupling

Product Description

Universal coupling
Enables the mechanical jointing of pipes made of different materials and of various outside diameters

Description
Wide outside diameter range: an average of 29 mm.

High performance
– Permanent leak tight joint when compressing the gasket between the end ring and the sleeve CZPT the pipe surface
– Epoxy powder coating (250 μm) and Geomet 500 Gr. B for the bolts.

Ease and speed of installation:
– Angular deflection ± 5° by side.
– Absorbs expansion and contraction.
– Accommodates misalignment.
– Important setting gap.

Conformity to standards
– EN 14525 : Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fiber-cement.
– NF A 48-830: Foundry products – Spheroidal graphite cast iron fittings for PVC drinking water pipes under pressure,
– EN 545: Ductile iron pipes, fittings, accessories and their joints for water pipelines 
– requirements and test methods,
– ISO 2531: Ductile iron pipes, fittings, and accessories and their joints for water applications.

Approval:- Drinking water approved (WRAS).

Note:
– This coupling does not resist to longitudinal forces and pipe pullout will occur. Ensure adequate restraint is provided.
– Not recommended for PE pipes.

Technical data
Range: DN 40 to 600.(Higher DN, please consult uUniversal coupling
Enables the mechanical jointing of pipes made of different materials and of various outside diameters

Description
Wide outside diameter range: an average of 29 mm.

High performance
– Permanent leak tight joint when compressing the gasket between the end ring and the sleeve CZPT the pipe surface
– Epoxy powder coating (250 μm) and Geomet 500 Gr. B for the bolts.

Ease and speed of installation:
– Angular deflection ± 5° by side.
– Absorbs expansion and contraction.
– Accommodates misalignment.
– Important setting gap.

Conformity to standards
– EN 14525 : Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fiber-cement.
– NF A 48-830: Foundry products – Spheroidal graphite cast iron fittings for PVC drinking water pipes under pressure,
– EN 545: Ductile iron pipes, fittings, accessories and their joints for water pipelines 
– requirements and test methods,
– ISO 2531: Ductile iron pipes, fittings, and accessories and their joints for water applications.

Approval:- Drinking water approved (WRAS).

Note:
– This coupling does not resist to longitudinal forces and pipe pullout will occur. Ensure adequate restraint is provided.
– Not recommended for PE pipes.

Technical data
Range: DN 40 to 600.(Higher DN, please consult us)
Max. working pressure: PN 16
Temperatures: from
 
 

2. How soon can I get a price quote?
Once we know the Size, material, drive method we can provide you with 1 competitive price quote within 24 hours.

3. Can I get a sample?
Yes, the samples are free for you. But you need to offer 1 courier account NO. to afford the fee for samples shipping. The samples’ sending usually takes 5-7days.

4. How can my order produced by my brand?
Yes, you can. Pls offer your brand or LOGO design to us(.AI or.PSD format), then we could produce all goods with your brand or LOGO.

5. What’s your delivery time?
Except our legal holiday, it will take 2-4 weeks for us to finish all your orders’ production.

6. Is there a minimum order requirement?
Due to the high machine setup cost and shipping freight, our minimum order quantity is 5pcs

7. Do you have butterfly valve related accessories?
Yes, we have. We have accessories: pneumatic actuators, electric actuators, limit switches, solenoid valves, etc.

8. Will you match competitors’ prices?
If you find a lower price elsewhere for the exact same specification, we will meet or beat that price as long as it is a little higher than our cost price.

9. What are your terms of delivery?
We accept FOB, CIF etc. You can choose the 1 which is the most convenient or cost effective for you.

10. Where can I meet you by face to face?
A,Our headquarter is located in ZheJiang , if you travel to ZheJiang , you can visit our office at any time, we could pick you up from your location in ZheJiang and ZheJiang .
B,Our factories are located in ZheJiang and HangZhou, welcome to visit our factory before you cooperate with us.
C,We will attend China Spring Canton Fair and China Autumn Canton Fair every year, welcome to visit our booth at that time.

11. How can I be your sole agent in our country?
Welcome you to become our sole agent firstly. According to different countries’ demand, if your yearly purchase quantity from us can reach 10000 to 30000 pcs you could be our sole agent in your country. If you wanna know exact quantity requirement for each country, pls feel free to contact us at any time.

universal coupling

Can a Universal Coupling Be Used to Connect Shafts of Different Sizes or Types?

Yes, one of the key advantages of a universal coupling is its ability to connect shafts of different sizes or types. Universal couplings are designed to accommodate misalignment between shafts, including angular, parallel, and axial misalignment.

The design of the universal coupling allows it to transmit torque and rotation between two shafts that are not perfectly aligned. This feature is particularly beneficial in situations where precise alignment is challenging or not possible due to equipment design, manufacturing tolerances, or operating conditions.

The universal coupling consists of two jointed forks, each connected to one of the shafts. The forks are connected by a cross-shaped component called the spider or cross assembly. The spider allows for the transfer of torque while allowing the shafts to move independently of each other to a certain degree.

The ability to accommodate misalignment makes universal couplings suitable for various applications, including automotive steering systems, industrial machinery, pumps, and marine equipment. Whether the shafts have different sizes or types, the universal coupling provides a flexible connection that helps minimize stress on the shafts and other connected components.

universal coupling

Are there special half couplings designed for specific types of pipes (e.g., stainless steel, PVC)?

Yes, there are special half couplings designed to accommodate specific types of pipes, such as stainless steel and PVC. The selection of the half coupling material depends on the material of the pipe being used in the system. Here are some common types of half couplings designed for specific pipe materials:

1. Stainless Steel Half Couplings: These half couplings are specifically designed for use with stainless steel pipes. Stainless steel half couplings offer excellent corrosion resistance and durability, making them suitable for applications in industries where corrosion or chemical compatibility is a concern.

2. PVC Half Couplings: PVC half couplings are designed for use with PVC (polyvinyl chloride) pipes commonly used in plumbing and irrigation systems. These couplings provide a secure and leak-resistant connection for PVC pipes and are typically non-corrosive and lightweight.

3. Carbon Steel Half Couplings: Carbon steel half couplings are commonly used with carbon steel pipes in various industrial applications. They offer good strength and durability, making them suitable for high-pressure and high-temperature systems.

4. Brass Half Couplings: Brass half couplings are used with brass pipes in plumbing and other low-pressure applications. Brass provides good corrosion resistance and is often preferred for its aesthetic appearance.

5. Copper Half Couplings: Copper half couplings are designed for use with copper pipes, commonly used in plumbing and refrigeration systems. Copper offers excellent heat and electrical conductivity and is resistant to corrosion.

6. Ductile Iron Half Couplings: Ductile iron half couplings are used with ductile iron pipes, offering high strength and ductility. They are commonly used in water and wastewater applications.

7. Galvanized Half Couplings: Galvanized half couplings are coated with zinc to provide corrosion resistance. They are used with galvanized pipes in outdoor and exposed environments.

The choice of half coupling material should match the material of the pipe to ensure compatibility, prevent corrosion, and maintain the overall integrity of the system. It is essential to consult with coupling manufacturers or industry experts to select the appropriate half coupling material based on the specific application and pipe material used in the system.

universal coupling

What is a Universal Coupling and Where is it Used in Mechanical Systems?

A universal coupling, also known as a universal joint or U-joint, is a mechanical device used to connect two shafts that are not in a straight line and allow them to rotate at different angles to each other. It is a type of coupling that provides flexibility and compensates for misalignment between shafts, making it ideal for transmitting torque in applications where shafts are not perfectly aligned.

The universal coupling consists of two yoke-like shaft ends connected by a cross-shaped intermediate component. Each yoke end is attached to one of the shafts, and the cross-shaped component allows the two shafts to rotate independently while maintaining rotational power transmission.

The universal coupling is widely used in various mechanical systems and applications, including:

  • Automotive Drivetrains: Universal couplings are commonly used in automotive drivetrains to transmit power from the engine to the wheels. They allow the driveshaft to accommodate changes in angle and distance between the engine, transmission, and wheels.
  • Industrial Machinery: In industrial machinery, universal couplings are used to connect shafts in equipment such as pumps, compressors, gearboxes, and conveyors. They enable smooth power transmission even when the shafts are misaligned due to installation tolerances or operational conditions.
  • Marine Applications: Universal couplings are used in marine propulsion systems to connect the engine to the propeller shaft. They can accommodate the movement of the ship’s hull and allow the propeller to rotate at different angles to the engine.
  • Aerospace: Universal couplings are used in aerospace applications to transmit torque between non-aligned shafts, such as in aircraft control systems.
  • Steering Mechanisms: Universal couplings are employed in steering systems of vehicles and machinery to transfer motion from the steering wheel to the steering linkage, allowing for changes in angles during turning.

Overall, universal couplings are essential components in many mechanical systems where misalignment and flexibility are a concern. They facilitate smooth power transmission, reduce vibration, and extend the life of the connected equipment by absorbing shocks and compensating for misalignment.

China Best Sales Wide Range Universal Coupling for Different Materials and of Various Outside Diameters  universal couplingChina Best Sales Wide Range Universal Coupling for Different Materials and of Various Outside Diameters  universal coupling
editor by CX 2023-08-18

universal coupling

As one of leading universal coupling manufacturers, suppliers and exporters of products, We offer universal coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of universal coupling

Recent Posts