China Standard Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling universal coupling

Product Description

Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling

Product Description

Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.

Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc

Coupling performance

1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CHINAMFG requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.

How to select the appropriate coupling type

The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.

If you cannot determine the type, you can contact our professional engineer

Related products

 

Company Profile

 

Our Equipments

Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.

Machining equipments
Heat equipment

 

Our Factory
Application – Photos from our partner customers

Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

universal coupling

How to Install and Align a Universal Coupling in a Mechanical Assembly

Proper installation and alignment of a universal coupling are crucial for its efficient and reliable operation. Here are the steps to install and align a universal coupling in a mechanical assembly:

  1. Prepare the Coupling Components: Ensure that all the universal coupling components are clean and free from any dirt, debris, or damage. Verify that the shafts to be connected are appropriately sized and compatible with the coupling.
  2. Inspect the Coupling: Check the universal coupling’s spider or cross assembly for any signs of wear, cracks, or damage. Replace the spider if it shows any signs of deterioration.
  3. Align the Shafts: Position the two shafts that need to be connected to the universal coupling. Align the shafts as closely as possible, aiming for minimum misalignment. Ensure that the shafts are parallel and that the angular misalignment is within the coupling’s specified tolerance.
  4. Insert the Spider: Carefully insert the spider or cross assembly into the forks of the universal coupling. Make sure the spider is properly seated and fits securely in both forks.
  5. Secure the Coupling: Depending on the type of universal coupling, secure the forks onto the shafts using set screws, bolts, or clamps. Follow the manufacturer’s guidelines for the specific coupling model.
  6. Check for Free Movement: After securing the coupling, check that the spider allows for free movement of the shafts within the specified angular and axial limits. The shafts should rotate smoothly without any binding or interference.
  7. Perform a Trial Run: Before finalizing the installation, perform a trial run to ensure that the coupling operates smoothly and without any unusual vibrations or noises.
  8. Make Final Adjustments: If necessary, make minor adjustments to the alignment or coupling position to optimize the performance. Recheck the shaft alignment and ensure that it meets the required specifications.
  9. Tighten Fasteners: Once the alignment is satisfactory, tighten all the fasteners securely to prevent any movement or slippage during operation.
  10. Perform Regular Maintenance: Schedule regular inspections and maintenance for the universal coupling to ensure its continued performance and reliability. Lubricate the coupling as per the manufacturer’s recommendations to reduce wear and friction.

Remember that accurate alignment of the universal coupling will minimize stress on the shafts and extend the lifespan of the coupling and connected components. If you are unsure about the installation process or the coupling’s compatibility with your system, consult the manufacturer or a qualified engineer for guidance.

universal coupling

How do Temperature and Environmental Conditions Affect Universal Coupling Performance?

Temperature and environmental conditions can have a significant impact on the performance of universal couplings in mechanical systems. The materials used in manufacturing the coupling and the operating conditions can influence its durability, flexibility, and overall functionality.

Temperature: Universal couplings are often made from materials such as steel, stainless steel, or aluminum, which have specific temperature ranges they can withstand. Extreme temperatures, whether hot or cold, can affect the mechanical properties of the coupling material. High temperatures may lead to thermal expansion, which can affect the coupling’s fit and alignment. On the other hand, extremely low temperatures can cause the material to become brittle, reducing its flexibility and impact resistance. It is crucial to choose a universal coupling that is suitable for the anticipated temperature range in the application to ensure reliable performance.

Environmental Conditions: Universal couplings used in harsh environments, such as those exposed to moisture, chemicals, dust, or abrasive particles, need to be made from corrosion-resistant and durable materials. Corrosion can degrade the coupling over time, leading to reduced performance and potential failure. Additionally, environmental contaminants can affect the smooth operation of the coupling and cause premature wear. Proper sealing and protective coatings can enhance the coupling’s resistance to environmental factors.

Dynamic Operating Conditions: Some applications may subject the universal coupling to dynamic loads, shocks, or high-speed rotations. In such cases, the coupling’s fatigue strength and torsional stiffness become critical factors. High dynamic loads and shock forces can lead to stress concentration and fatigue failure in the coupling if it is not appropriately designed for such conditions.

Alignment Maintenance: Temperature variations and environmental conditions can cause changes in the alignment of the connected shafts. It is essential to regularly inspect and maintain the alignment of the coupling to prevent excessive wear and ensure optimal performance.

Overall, selecting a universal coupling that is designed to withstand the specific temperature and environmental conditions of the application is crucial for ensuring its longevity and reliable performance in mechanical systems.

universal coupling

Advantages of Using a Universal Coupling in a Drive System

A universal coupling, also known as a universal joint or U-joint, offers several advantages when used in a drive system:

  • Flexibility: Universal couplings can transmit torque and rotation between shafts that are not in a straight line and have angular misalignment. This flexibility allows for easier design and installation of the drive system, especially in applications where the shafts are not perfectly aligned.
  • Angular Misalignment Compensation: The universal joint can handle angular misalignment between the connected shafts, making it suitable for applications where the shafts are at different angles to each other. This feature helps reduce stress on the shafts and bearings, leading to extended component life.
  • Smooth Power Transmission: The double universal joint, also known as the double Cardan joint, can reduce the angular variation between the input and output shafts, resulting in smoother power transmission and reduced vibration in certain applications.
  • Constant Velocity: The constant velocity joint (CV joint) maintains a constant velocity ratio between the input and output shafts. This is particularly important in automotive drive shafts, especially in front-wheel-drive vehicles, where the drive shafts must adjust to changing angles as the wheels turn. The constant velocity feature provides a smoother ride and reduces vibration.
  • Compact Design: Universal couplings have a relatively simple design, which allows for a compact and lightweight construction. This is advantageous in applications where space and weight are critical factors.
  • Cost-Effective: Universal couplings are cost-effective compared to some other types of couplings, making them a popular choice for various mechanical systems.
  • Reliability: When properly lubricated and maintained, universal couplings can provide reliable and efficient power transmission for a long service life.
  • Versatility: Universal couplings are versatile and find applications in various industries, including automotive, aerospace, marine, industrial machinery, and power transmission systems.

In conclusion, the universal coupling’s ability to handle misalignment and provide flexibility in power transmission makes it a valuable component in many drive systems. Its advantages in compensating for angular misalignment, ensuring smooth power transmission, and offering a cost-effective and reliable solution have contributed to its widespread use in different mechanical applications.

China Standard Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling  universal couplingChina Standard Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling  universal coupling
editor by CX 2024-05-13

Tags: chain | chain coupling | chain gear | chain roller | chain roller chain | chain roller gear motor | chain roller motor | china chain | china coupling | china motor | china roller chain | coupling | coupling chain | coupling shaft | flange coupling | flange flexible coupling | flange shaft | flange shaft coupling | flexible coupling | flexible flange coupling | flexible gear | flexible gear coupling | flexible jaw coupling | flexible motor coupling | flexible motor shaft coupling | flexible roller chain | flexible rubber coupling | flexible shaft | flexible shaft coupling | flexible steel shaft | fluid coupling | gear | gear chain | gear coupling | gear motor | gear motor pump | gear motor shaft | gear motor shaft coupling | gear pump | gear pump stainless steel | gear shaft | gear shaft coupling | gear shaft rubber | grid coupling | hrc coupling | Jaw Coupling | jaw shaft | joint shaft | motor | motor chain | motor coupling | motor gear shaft | motor motor | motor pump | motor shaft | motor shaft coupling | motor shaft gear | nm coupling | pump gear | pump motor | pump shaft | Rigid Coupling | rigid shaft coupling | roller chain | roller chain chain | roller chain coupling | roller chain gear | roller chain gear coupling | roller chain shaft coupling | roller chain stainless steel | roller chain standard | roller gear | roller motor | roller shaft | roller steel chain | rubber coupling | rubber gear coupling | rubber roller chain | rubber shaft | rubber shaft coupling | rubber shaft roller | shaft | shaft coupling | shaft coupling flange | shaft flange | shaft gear | shaft motor | shaft pump | shaft roller | shaft steel | spider coupling | spider motor | spline coupling | Spline shaft | spline shaft coupling | stainless roller chain | stainless shaft | stainless steel chain | stainless steel coupling | stainless steel gear pump | stainless steel roller chain | stainless steel shaft | stainless steel spline shaft | standard chain | standard gear | standard roller chain | standard spline shaft | steel chain | steel rigid flange shaft coupling | steel roller chain | steel shaft | tyre coupling | universal coupling | universal flexible shaft | Universal joint | universal motor | universal roller chain | universal shaft

universal coupling

As one of leading universal coupling manufacturers, suppliers and exporters of products, We offer universal coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of universal coupling

Recent Posts