China Standard Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling universal coupling

Product Description

Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling

Product Description

Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.

Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc

Coupling performance

1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CHINAMFG requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.

How to select the appropriate coupling type

The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.

If you cannot determine the type, you can contact our professional engineer

Related products

 

Company Profile

 

Our Equipments

Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.

Machining equipments
Heat equipment

 

Our Factory
Application – Photos from our partner customers

Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

universal coupling

Specific Safety Considerations when Using Universal Couplings

Universal couplings are essential components in many mechanical systems, and their proper use is critical for the safety of personnel and the integrity of the equipment. Here are some specific safety considerations when using universal couplings:

  1. Regular Inspections: Perform routine inspections of the universal coupling to check for signs of wear, damage, or misalignment. Any issues should be addressed promptly to prevent potential accidents.
  2. Proper Installation: Ensure that the universal coupling is installed correctly and securely. Follow the manufacturer’s guidelines and torque specifications for tightening bolts, set screws, or clamps.
  3. Shaft Locking Mechanisms: If the universal coupling uses set screws or clamps to secure the shafts, ensure that these locking mechanisms are adequately tightened and checked periodically to prevent shaft slippage during operation.
  4. Correct Coupling Selection: Choose the appropriate universal coupling based on the specific application’s torque, speed, and misalignment requirements. Using an undersized coupling can lead to premature failure and safety hazards.
  5. Misalignment Limits: Stay within the manufacturer’s specified misalignment limits for the universal coupling. Excessive misalignment can lead to increased stress on the coupling and connected components, potentially causing failure.
  6. Guarding and Enclosure: If the universal coupling is exposed or accessible to personnel, consider installing guarding or enclosures to prevent accidental contact and reduce the risk of injury.
  7. Training and Awareness: Ensure that personnel working with or around machinery equipped with universal couplings receive proper training and understand the potential hazards associated with these components.
  8. Maintenance and Lubrication: Follow a regular maintenance schedule and lubricate the universal coupling as recommended by the manufacturer. Proper lubrication reduces friction and wear, contributing to safe and reliable operation.
  9. Emergency Stop: Equip the machinery with an emergency stop system that allows operators to quickly shut down the equipment in case of an emergency or abnormal condition.
  10. Consult the Manufacturer: If there are any concerns or questions about the safety aspects of using a universal coupling in a specific application, consult the manufacturer or a qualified engineer for guidance.

By adhering to these safety considerations and implementing proper installation, maintenance, and operational practices, the use of universal couplings can be safer and more effective in power transmission applications.

universal coupling

Are there special half couplings designed for specific types of pipes (e.g., stainless steel, PVC)?

Yes, there are special half couplings designed to accommodate specific types of pipes, such as stainless steel and PVC. The selection of the half coupling material depends on the material of the pipe being used in the system. Here are some common types of half couplings designed for specific pipe materials:

1. Stainless Steel Half Couplings: These half couplings are specifically designed for use with stainless steel pipes. Stainless steel half couplings offer excellent corrosion resistance and durability, making them suitable for applications in industries where corrosion or chemical compatibility is a concern.

2. PVC Half Couplings: PVC half couplings are designed for use with PVC (polyvinyl chloride) pipes commonly used in plumbing and irrigation systems. These couplings provide a secure and leak-resistant connection for PVC pipes and are typically non-corrosive and lightweight.

3. Carbon Steel Half Couplings: Carbon steel half couplings are commonly used with carbon steel pipes in various industrial applications. They offer good strength and durability, making them suitable for high-pressure and high-temperature systems.

4. Brass Half Couplings: Brass half couplings are used with brass pipes in plumbing and other low-pressure applications. Brass provides good corrosion resistance and is often preferred for its aesthetic appearance.

5. Copper Half Couplings: Copper half couplings are designed for use with copper pipes, commonly used in plumbing and refrigeration systems. Copper offers excellent heat and electrical conductivity and is resistant to corrosion.

6. Ductile Iron Half Couplings: Ductile iron half couplings are used with ductile iron pipes, offering high strength and ductility. They are commonly used in water and wastewater applications.

7. Galvanized Half Couplings: Galvanized half couplings are coated with zinc to provide corrosion resistance. They are used with galvanized pipes in outdoor and exposed environments.

The choice of half coupling material should match the material of the pipe to ensure compatibility, prevent corrosion, and maintain the overall integrity of the system. It is essential to consult with coupling manufacturers or industry experts to select the appropriate half coupling material based on the specific application and pipe material used in the system.

universal coupling

Choosing the Right Universal Coupling for a Specific Application

When selecting a universal coupling for a particular application, several factors need to be considered to ensure optimal performance and reliability:

  • Load and Torque Requirements: Determine the maximum load and torque that the coupling will experience during operation. Choose a universal joint that can handle these loads without exceeding its rated capacity.
  • Speed: Consider the operating speed of the application as high-speed applications may require different coupling designs to ensure smooth power transmission.
  • Shaft Sizes: Measure the diameters of the shafts that need to be connected. The universal coupling should have compatible shaft bores to ensure a proper fit.
  • Angular Misalignment: Evaluate the angle between the shafts that the universal joint needs to accommodate. Choose a universal coupling with the appropriate angular misalignment capability to avoid excessive stress on the components.
  • Environmental Conditions: Consider the environmental factors such as temperature, humidity, dust, and corrosive agents. Choose a coupling made from materials suitable for the specific conditions to ensure longevity and reliability.
  • Space Limitations: Evaluate the available space for the coupling installation. Ensure that the chosen universal joint can fit within the constraints of the system.
  • Serviceability: Consider the ease of maintenance and the availability of replacement parts if needed. Opt for a universal coupling that is easy to access and service when required.
  • Application Type: Determine the specific application type, such as automotive, industrial machinery, marine, aerospace, etc. Different applications may require unique coupling designs and materials to meet their demands.
  • Alignment Frequency: If the system experiences frequent misalignments, consider using constant velocity joints (CV joints) that maintain a constant speed ratio between input and output shafts even at different angles.

By carefully considering these factors and matching the specifications of the universal coupling to the specific application requirements, you can ensure reliable and efficient power transmission and minimize the risk of premature coupling failure.

China Standard Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling  universal couplingChina Standard Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling  universal coupling
editor by CX 2024-04-30

Tags: chain | chain coupling | chain gear | chain roller | chain roller chain | chain roller gear motor | chain roller motor | china chain | china coupling | china motor | china roller chain | coupling | coupling chain | coupling shaft | flange coupling | flange flexible coupling | flange shaft | flange shaft coupling | flexible coupling | flexible flange coupling | flexible gear | flexible gear coupling | flexible jaw coupling | flexible motor coupling | flexible motor shaft coupling | flexible roller chain | flexible rubber coupling | flexible shaft | flexible shaft coupling | flexible steel shaft | fluid coupling | gear | gear chain | gear coupling | gear motor | gear motor pump | gear motor shaft | gear motor shaft coupling | gear pump | gear pump stainless steel | gear shaft | gear shaft coupling | gear shaft rubber | grid coupling | hrc coupling | Jaw Coupling | jaw shaft | joint shaft | motor | motor chain | motor coupling | motor gear shaft | motor motor | motor pump | motor shaft | motor shaft coupling | motor shaft gear | nm coupling | pump gear | pump motor | pump shaft | Rigid Coupling | rigid shaft coupling | roller chain | roller chain chain | roller chain coupling | roller chain gear | roller chain gear coupling | roller chain shaft coupling | roller chain stainless steel | roller chain standard | roller gear | roller motor | roller shaft | roller steel chain | rubber coupling | rubber gear coupling | rubber roller chain | rubber shaft | rubber shaft coupling | rubber shaft roller | shaft | shaft coupling | shaft coupling flange | shaft flange | shaft gear | shaft motor | shaft pump | shaft roller | shaft steel | spider coupling | spider motor | spline coupling | Spline shaft | spline shaft coupling | stainless roller chain | stainless shaft | stainless steel chain | stainless steel coupling | stainless steel gear pump | stainless steel roller chain | stainless steel shaft | stainless steel spline shaft | standard chain | standard gear | standard roller chain | standard spline shaft | steel chain | steel rigid flange shaft coupling | steel roller chain | steel shaft | tyre coupling | universal coupling | universal flexible shaft | Universal joint | universal motor | universal roller chain | universal shaft

universal coupling

As one of leading universal coupling manufacturers, suppliers and exporters of products, We offer universal coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of universal coupling

Recent Posts