China wholesaler Wide Range Universal Coupling for Different Materials and of Various Outside Diameters universal coupling

Product Description

Universal coupling
Enables the mechanical jointing of pipes made of different materials and of various outside diameters

Description
Wide outside diameter range: an average of 29 mm.

High performance
– Permanent leak tight joint when compressing the gasket between the end ring and the sleeve CHINAMFG the pipe surface
– Epoxy powder coating (250 μm) and Geomet 500 Gr. B for the bolts.

Ease and speed of installation:
– Angular deflection ± 5° by side.
– Absorbs expansion and contraction.
– Accommodates misalignment.
– Important setting gap.

Conformity to standards
– EN 14525 : Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fiber-cement.
– NF A 48-830: Foundry products – Spheroidal graphite cast iron fittings for PVC drinking water pipes under pressure,
– EN 545: Ductile iron pipes, fittings, accessories and their joints for water pipelines 
– requirements and test methods,
– ISO 2531: Ductile iron pipes, fittings, and accessories and their joints for water applications.

Approval:- Drinking water approved (WRAS).

Note:
– This coupling does not resist to longitudinal forces and pipe pullout will occur. Ensure adequate restraint is provided.
– Not recommended for PE pipes.

Technical data
Range: DN 40 to 600.(Higher DN, please consult uUniversal coupling
Enables the mechanical jointing of pipes made of different materials and of various outside diameters

Description
Wide outside diameter range: an average of 29 mm.

High performance
– Permanent leak tight joint when compressing the gasket between the end ring and the sleeve CHINAMFG the pipe surface
– Epoxy powder coating (250 μm) and Geomet 500 Gr. B for the bolts.

Ease and speed of installation:
– Angular deflection ± 5° by side.
– Absorbs expansion and contraction.
– Accommodates misalignment.
– Important setting gap.

Conformity to standards
– EN 14525 : Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fiber-cement.
– NF A 48-830: Foundry products – Spheroidal graphite cast iron fittings for PVC drinking water pipes under pressure,
– EN 545: Ductile iron pipes, fittings, accessories and their joints for water pipelines 
– requirements and test methods,
– ISO 2531: Ductile iron pipes, fittings, and accessories and their joints for water applications.

Approval:- Drinking water approved (WRAS).

Note:
– This coupling does not resist to longitudinal forces and pipe pullout will occur. Ensure adequate restraint is provided.
– Not recommended for PE pipes.

Technical data
Range: DN 40 to 600.(Higher DN, please consult us)
Max. working pressure: PN 16
Temperatures: from
 
 

2. How soon can I get a price quote?
Once we know the Size, material, drive method we can provide you with 1 competitive price quote within 24 hours.

3. Can I get a sample?
Yes, the samples are free for you. But you need to offer 1 courier account NO. to afford the fee for samples shipping. The samples’ sending usually takes 5-7days.

4. How can my order produced by my brand?
Yes, you can. Pls offer your brand or LOGO design to us(.AI or.PSD format), then we could produce all goods with your brand or LOGO.

5. What’s your delivery time?
Except our legal holiday, it will take 2-4 weeks for us to finish all your orders’ production.

6. Is there a minimum order requirement?
Due to the high machine setup cost and shipping freight, our minimum order quantity is 5pcs

7. Do you have butterfly valve related accessories?
Yes, we have. We have accessories: pneumatic actuators, electric actuators, limit switches, solenoid valves, etc.

8. Will you match competitors’ prices?
If you find a lower price elsewhere for the exact same specification, we will meet or beat that price as long as it is a little higher than our cost price.

9. What are your terms of delivery?
We accept FOB, CIF etc. You can choose the 1 which is the most convenient or cost effective for you.

10. Where can I meet you by face to face?
A,Our headquarter is located in ZheJiang , if you travel to ZheJiang , you can visit our office at any time, we could pick you up from your location in ZheJiang and ZheJiang .
B,Our factories are located in ZheJiang and HangZhou, welcome to visit our factory before you cooperate with us.
C,We will attend China Spring Canton Fair and China Autumn Canton Fair every year, welcome to visit our booth at that time.

11. How can I be your sole agent in our country?
Welcome you to become our sole agent firstly. According to different countries’ demand, if your yearly purchase quantity from us can reach 10000 to 30000 pcs you could be our sole agent in your country. If you wanna know exact quantity requirement for each country, pls feel free to contact us at any time.

universal coupling

What are the Common Materials Used in Manufacturing Universal Couplings?

Universal couplings are commonly manufactured using a variety of materials, each chosen based on its mechanical properties, durability, and compatibility with the application. Some of the common materials used in manufacturing universal couplings include:

  • Steel: Steel is one of the most widely used materials for universal couplings. It offers excellent strength, durability, and resistance to wear. Carbon steel and alloy steel are commonly used for general-purpose universal couplings.
  • Stainless Steel: Stainless steel is chosen for its corrosion resistance and ability to withstand harsh environmental conditions. It is commonly used in applications where the coupling may be exposed to moisture, chemicals, or high temperatures.
  • Aluminum: Aluminum is lightweight and has good corrosion resistance. It is often used in applications where weight reduction is essential, such as in the automotive and aerospace industries.
  • Cast Iron: Cast iron is known for its high strength and wear resistance. It is commonly used for heavy-duty applications and situations where shock loads may be present.
  • Bronze: Bronze is a material chosen for its self-lubricating properties. It is commonly used in applications where lubrication may be limited or difficult.
  • Plastics: Some universal couplings use high-strength plastics, such as polyurethane or nylon, for specific applications where non-metallic materials are preferred due to factors like electrical insulation or chemical resistance.

The choice of material depends on factors such as the application’s operating conditions, load requirements, temperature range, and potential exposure to corrosive or abrasive substances. Manufacturers select the appropriate material to ensure that the universal coupling performs reliably and efficiently in its intended environment.

universal coupling

Can a Universal Coupling Reduce Vibration and Noise in Mechanical Systems?

Yes, a universal coupling can help reduce vibration and noise in mechanical systems, especially in applications where misalignment is a concern. Universal couplings are designed to accommodate angular misalignment between shafts, which can arise due to various factors such as manufacturing tolerances, thermal expansion, or dynamic forces.

When shaft misalignment occurs in a mechanical system, it can lead to vibration and noise during operation. This is because misaligned shafts cause uneven distribution of forces and result in increased stresses on bearings, shafts, and other connected components. The resulting vibration and noise can be detrimental to the performance, efficiency, and lifespan of the machinery.

By using a universal coupling, the coupling’s design allows it to compensate for angular misalignment and minimize the transmission of misalignment-induced vibrations to the connected equipment. The flexibility of the universal coupling allows it to handle moderate angular misalignments while transmitting torque smoothly between shafts. This reduces the stresses on the connected components and mitigates the vibration and noise levels.

However, it is important to note that while universal couplings can help reduce vibration and noise caused by angular misalignment, they may not address other sources of vibration and noise in the system. For example, if the vibration is primarily caused by unbalanced rotating parts, worn bearings, or other factors unrelated to misalignment, a universal coupling alone may not be sufficient to eliminate the issue.

Overall, when selecting a universal coupling for a specific application, it is essential to consider the level of misalignment it can handle, the type of vibration and noise issues present, and whether additional measures are required to address other sources of vibration and noise in the mechanical system.

universal coupling

Can Universal Couplings Accommodate Misalignment in Shafts and Drives?

Yes, universal couplings are specifically designed to accommodate misalignment between shafts and drives. The unique design of universal couplings allows them to transmit torque and rotation between two shafts that are not in perfect alignment with each other. There are two primary types of misalignment that universal couplings can handle:

  • Angular Misalignment: Universal couplings can handle angular misalignment, which occurs when the shafts are not in line with each other and form an angle. The design of the universal joint allows it to bend and flex at different angles, allowing the shafts to stay connected and transmit torque even when they are not perfectly aligned.
  • Parallel Misalignment: Universal couplings can also handle parallel misalignment, which occurs when the two shafts are not perfectly parallel to each other. The flexible nature of the universal joint allows it to compensate for small variations in parallel alignment, ensuring that the shafts remain connected and transmit power efficiently.

By accommodating misalignment, universal couplings help to reduce stress on the shafts and other connected components, thus preventing premature wear and failure. They are commonly used in various applications, including automotive drivetrains, industrial machinery, marine propulsion systems, and aerospace equipment, where misalignment is inevitable due to the dynamic nature of the systems.

China wholesaler Wide Range Universal Coupling for Different Materials and of Various Outside Diameters  universal couplingChina wholesaler Wide Range Universal Coupling for Different Materials and of Various Outside Diameters  universal coupling
editor by CX 2023-09-28

universal coupling

As one of leading universal coupling manufacturers, suppliers and exporters of products, We offer universal coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of universal coupling

Recent Posts