Electrical power UNITS FOR LIFT TABLE

Power UNITS FOR LIFT TABLE 1
Common Description
This energy unit is created solely for the modest lift table,Consisting of substantial pressure gear pump, AC motor, multi-functional manifold, valves, tank, etc. This power unit is broadly applied from the field of logistic units including minifork lift, scissors lift and ariel functioning platforms. The lower-ing movement is controlled from the solenoid valve with all the velocity managed through the adjustable needle valve.
Power UNITS FOR LIFT TABLE 2
Common Description
This power unit is made solely for the medium lift table, Consisting of hugely effecient gear pump, AC motor, multifunctional manifold, valves, tank, ect. The decreasing movement is actived by the solenoid valve along with the velocity managed from the adjustable needle valve. Once the lift rises to a higher positoin, but the electrical power supply is minimize, the reducing motion is controlled from the guide override perform.
Power UNITS FOR LIFT TABLE 3
Common Description
This electrical power unit is created exclusively for the huge lift table, Consisting of hugely effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The decreasing movement is actived by the solenoid valve and also the velocity managed by a pressure compensated flow management valve.
Power UNITS FOR LIFT TABLE 4
Basic Description
This energy unit is built exclusively for the large lift table, Consisting of extremely effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The reducing motion is actived through the solenoid valve as well as the velocity managed by the adjustable needle valve. When the lift rises to a high positoin, but the electrical power supply is minimize, the reducing movement is managed by the manual override perform.
Special Notes
1. This power unit is of S3 duty cycle, which could only function intermittently and repeatedly, i.e. one minute on and 9 minutes off.
two. Clean all the hydraulic elements concerned ahead of installation of the energy unit.
3. Viscosity on the oil shoud be 15~46 cst,which should really also be clean and free of charge of impurities.N46 hydraulic oil is proposed.
4. Oil changing is required after the preliminary 100 operation hours,afterwards when each and every 3000 hrs.
five. The power unit shown is created to be mounted vertically.

Tags:

universal coupling

As one of leading universal coupling manufacturers, suppliers and exporters of products, We offer universal coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of universal coupling

Recent Posts