High ford motor company manufacturing facilities Cheap made in China – replacement parts – in Kikwit Democratic Republic of the Congo Quality Semi-Automatic Die Cutting Machine with Stripping Unit with top quality

High ford motor company manufacturing facilities Cheap  made in China - replacement parts -  in Kikwit Democratic Republic of the Congo  Quality Semi-Automatic Die Cutting Machine with Stripping Unit with top quality

We – EPG Group the most significant worm gearbox, couplings and gears manufacturing facility in China with 5 diverse branches. For far more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Efficient Semi-automatic Die-cutting and Creasing Device(Double registration method & stripping device)

one. Specs:

Product Device MY1two00EPA MY1300EPA MY1five00EPA
Max. Paper Measurement mm 1200*780 1300*960 1500*1100
Min. Paper Measurement mm 350*350 four hundred*410 540*410
Max. Die-reducing Dimension mm 1180*760 1280*940 1480*1080
Max. Speed sh/h -5500 -5500 -4500
Max. Wor ept Stress T three hundred 300 three hundred
Max. Paper Thickness mm one-seven 1-7 1-seven
Die-chopping Precision mm ±0.five ±0.five ±0.five
Complete Power KW 16 sixteen 19
Overall Fat kg 14500 16000 19000
Overall Dimension mm 7280*5000*2350 7800*5100*2345 8350*5700*2405

 
 
two. Functions of the equipment:
Primary Features:
1) The Bobst kind lower construction tends to make the cutting system motion like a scissor, it will recognize a total and simpler cut.
2) Main worm gear uses alloy copper materials, after the seasoned operator’s handbook scraping treatment method and strict common tests, it can ensures the driving elements ten a long time daily life.
three) The primary chains undertake imported British Renold brand name, the differences of 10 chains are much less than .2mm.
4) The connect in between gear box and driving shaft adopts sleeve and pin construction guaranteeing a strong relationship.

a. Velocity:  The device adopts frequency controller to attain stepless speed acceleration which can achieve to 4500 instances per hour. Throughout genuine manufacturing, it can typically run at 3800 to 4000 times per hour in accordance to the high quality of the board. If the top quality of the paper is excellent, a great operator even can operate the equipment at 4200 times for each hrs without experience as well challenging.
b. Safety: As it is proven in the picture of the device, the machine adopts rear element paper feeding technique which retains the operator away from the die-chopping portion. The mounting and adjustment of the die plate is also completed outdoors of the die-slicing portion with sensors and detectors at die-slicing component to ensure that the machine can not be began when the die-reducing plate is at adjustment standing.
Besides the sensors at die-cutting part, there are sensor or technique switches at window part to make the entire device at checking position to make certain its protection.
c. Operation usefulness:There is Gentleman-machine interface set up in the control panel which will exhibits the safety standing of the machine as well as malfunctions to facilitate the operator. Digicam is also mounted in front of the operator for him/her to keep track of the procedure status at the shipping part.
d. Main Structures and Key Substance Employed
1) Four Principal Massive Elements: They are referring to: bottom station, relocating system, upper system and equipment wall. The base station is produced of grey solid iron -HT two hundred the moving platform is ductile iron – QT 42-10 and the equipment wall is high quality A3 steel.
2) Main Push:
 
The eleven KW Siemens Motor together with the pneumatic clutch, worm shaft and worm equipment types a transferring set to make certain secure pressure out put of not much less than 300 tons.
The content for the worm shaft is 40Cr with quenching therapy and gear hardness HRC forty five-50. the material for the worm is copper alloy – ZQAL9-4.
 
The bearing that is utilized is SKF. The bush is copper alloy ZQSn6-6-3.
three) Die-slicing and Creasing Component: The travel is transferred by way of crank rod to pendulum which will deliver the moving platform to transfer up and down to achieve die-minimize and creasing function.
The pendulum is made of large good quality ductile iron. The pendulum axis is carried out by induction harden with surface hardness HRC forty three-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely stick to the specification of 1080 sort computerized die-chopping and creasing device. When compared with automatic die-chopping and creasing device which is employed for cardboard die-reducing, this variety of semi-automated die-chopping and creasing device is mainly utilised for corrugated board which requirements less stress for die-reducing, in this scenario fairly some producers have produced scaled-down width on the pendulum and smaller diameter on the pendulum shaft. We keep broader pendulum and greater diameter on its shaft to make our machine final for a longer life.
The die-slicing plate employs 7 mm 75 Crl plate which has far more hardness and daily life span than the manganese plate.  
4) Board Conveying:  

It adopts 3-cam intermittent positioning device to make sure the boarding conveying exact and secure.
The machine uses gripper bar variety with 12A lengthy joints chain which is much less in weight and much less shock to the intermittent device beneath the precondition to make certain the power of the chain. The brand of the chain is Renold U.K with substantial specific and high quality. .    
 
The Gripper bar adopts aviation aluminum with three bridge kind- mild in weight and large
5) Electric Portion  

The electrical parts are made and assembled in accordance to the European CE standard and makes use of world broad acknowledged manufacturer goods.
six) Installation of Die The die mounting and dismounting adopts facet withdrawing ways which time preserving and effortless for operation.
There are two techniques for the fixation of the die-either by bolt or clippers which are subject to customer’s advice.
The chase loc ept is pneumatic which is straightforward, practical and trustworthy.
e. Special Characters of Our Device:
1) Clever And Unique Front Lay Style:  
In contrast with the card board sheet, the corrugated board has a lot more strength. If the corrugated board abnormally reaches to the entrance lay, it will hurt the entrance lay and the gripper bar when the entrance lay reaches to its greatest situation.
Typically the producers will put in sensors on this portion to end the machine when the paper is fed abnormally to the front lay. Nonetheless, when the machine is working at the large speed, the inertia will deliver the machine to operate for a even though to make the entrance lay to its maximum point and then also hurt the entrance lay and the gripper bar.
Our particular design and style is that when the abnormal board feeding occurs and getting detected, the front lay can in no way reaches to its highest point which can make free of charge from front lay and gripper bar damages due to the fact of abnormal paper feeding.
As it is our special style, so there is no photo to be demonstrated below.
two) Optional Delivery System: According to the requirement of the consumer we can do the delivery platform either square variety or E variety (as shown in the photograph) . If the customer has ample pallets, he can choose sq. type. If the consumer does have enough pallet, he can pick, E kind system for which will also provide 4 shipping and delivery trolleys.
3) Pneumatic Pre-loading and Lifting Step Unit: The pre-loading unit is pneumatic pushed. When one paper measurement is set, when you do other pile of pre-loading, there is no trouble of you to reset the pre-loading unit, you can just push the button and the equipment will do for you.
The lifting step device is also pneumatic to facilitate the conveying of the paper pile.
four) Dancing Roller Feeding: Fairly some of the die-cutting machine producers use direct feeding method which is the operator will feed the board immediately to the mouth of the gripper. What we have located that the feeding time to the gripper is only .3 seconds which helps make the board feeding work hard and inaccurate.
Our machine uses an added dance roller feeding program whose board feeding time can be increase to .6 second. With each other with the conveying parts it makes an simpler work of the operator and more quickly in efficiency of the equipment.
For illustration:  If an operator operates the direct feeding semi-automated die-chopping machine at 3300 sheets for every hour, he can easily operate our equipment at 3700 – 4000 sheets for every hour.
3. Conveying Part:
The board gained by the dance roller will go by way of a conveying part with belt conveying and belt pressing which makes the board currently being pressed ahead of reaching to the entrance lay.
Just before the board reaches to the entrance lay, he will be repositioned by the aspect lay.
By these methods, the board conveyed by the dance roller will be much more exact and stable when they achieve to the gripper bar.
There is also detector to detect the status of the board. If board does not come to the front lay at standard placement, the detector will send indicators to quit the machine.

4. Striping Element
    1) Striping is 50 percent striping which can strip off a few – edge waste of the board.
     2) There are upper chase, center chase and decrease chase the place the male, elastic block and feminine die are positioned to strip off the squander.

five. None-quit Feeding and Delivery

This type of equipment has our patented system – non-stop feeding and shipping functions which can lessen the wor ept pressure of the operator and boost the wor ept efficiency of the device
 
Below this system, the pre-piling is at the facet of the operator. The pre-piled board can be transported beneath the principal pile when the main pile is detected short of paper.
At the shipping element, when the board is lower to be about 1 meter, the equipment will drive the die-cut board pile out of the machine shipping and delivery portion so that it is straightforward for the operator to draw them to the specified spot with no the need of halting the machine.  
six. Configurations:

Name Brand name and Origin Remarks
Bearing SKF Swiss Crucial component
IKO Japan or HangZhou, China Not essential element
Chain Renold U.K Principal Chain ( Discrepancy of much less than .2 mm for per ten chains of device chain duration)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contractor, buttons TELEMECANIQUE
France
 
Picture Electric powered Change Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Primary Motor Siemens Joint Undertaking
PLC Delta, ZheJiang  
Man-equipment Interface Delta  
Pneumatic Components Dawn, ZheJiang  
Rotary Joints SMC Japan  
Motor at feeding and shipping and delivery CPG ZheJiang  

 
 

/ The use of unique gear manufacturer’s (OEM) component figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our company and the shown substitute parts contained herein are not sponsored, authorized, or produced by the OEM. /

High ford motor company manufacturing facilities Cheap  made in China - replacement parts -  in Kikwit Democratic Republic of the Congo  Quality Semi-Automatic Die Cutting Machine with Stripping Unit with top quality

High ford motor company manufacturing facilities Cheap  made in China - replacement parts -  in Kikwit Democratic Republic of the Congo  Quality Semi-Automatic Die Cutting Machine with Stripping Unit with top quality

universal coupling

As one of leading universal coupling manufacturers, suppliers and exporters of products, We offer universal coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of universal coupling

Recent Posts