Rubber factory made in China replacement parts in Juiz De Fora Brazil Internal Mixer N 75L) , Internal Mixer with top quality

Rubber factory made in China  replacement parts  in Juiz De Fora Brazil Internal Mixer N 75L) , Internal Mixer with top quality

We – EPG Group the greatest gearbox & motors , couplings and gears factory in China with 5 various branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Rubber Internal Mixer &lparX&lparS&rparN-75L&rpar &comma Inner Mixer

Quick Introduction&colon

1&period     Mixing Chamber
The mixing chamber is largely produced by alloy metal with harden therapy&time period The surface area of inner chamber is with anti-dress in alloy metal created up welding and plated with durable and anti-corrosion challenging chrome&period

two&period     Typical Be aware Pump
Timing injection pump to the sealing method on a standard injection of hydraulic oil&comma lubrication sealing result&period

three&period     Thermal Resistance &lparor thermal few&rpar
There is a plug-in thermal resistance or thermal couple in middle segment of the base of the chamber to be related to electrical program to inspect and management the mixing temperature&interval

four&period     Rotors
It is made to the hollow blades of banbury kind&period The hollows are related with axial gap of rotor shaft employed as cooling or heating passage&interval The prime edges and the side faces of blades are surface area welded with challenging alloy&comma then plated with difficult chrome and polished&period

five&period     Cooling&solheating Program
A widespread piping technique is adopted for either cooling or heating substance in mixing procedure&period of time Via the method cooling drinking water or steam is fed in a few methods to the cavities of the rotors blades&comma – the jackets of the mixing chamber and the leading ram&period of time

six&period     Tilting System
It is made up of a rotor with brake&comma cycloidal gear reducer&comma TP kind worm and worm gear&comma etc&period It is capable to actuate the mixing chamber tilting by 140° around the entrance rotors&time period

seven&period     Dust End Gadget
At the joint among the prime of mixing chamber and the cantilevered arm of the device frame&comma the dust sealing assembled with curved slotted partings are employed for acquiring an excellent and trustworthy sealing goal&period The conclude experience of the rotor is sealed by finish contact sealing with non oil-lubrication and it seals effectively and is use-resistance and resilient&period of time

eight&period     The transmission method
The transmission technique adopts harden-gear velocity reducer with a compacted composition for lower sounds&comma more time solution life and elevated safety factor&interval

9&period     Pneumatic management program
Pneumatic manage program is controlled by PLC purchase&period of time A bi-directional air cylinder tends to make the ram up or down&interval In case of the more than load happens when mixing chamber&comma the prime ram can be raised immediately or manually if essential&comma so as to safeguard motor from overloading&period

10&period   Electrical Manage Program
Imported PLC unit and electric manage parts which are all imported items or imported technology items are adopted in the electric manage method to raise manage reliability&period

Technical Parameter Models
X&lparS&rparN-3L X&lparS&rparN-5L X&lparS&rparN-10L X&lparS&rparN-20L X&lparS&rparN-35L X&lparS&rparN-55L X&lparS&rparN-75L X&lparS&rparN-110L X&lparS&rparN-150L X&lparS&rparN-200
Whole Quantity of Mixing Chamber &lparL&rpar    eight fifteen 25    forty five     seventy five one hundred twenty five      180 250 325 440
Wor ept Volume of Mixing Chamber &lparL&rpar   three five ten     20     35 fifty five       seventy five a hundred and ten one hundred fifty 200
Rotating Speed of Front Rotor &lparr&solmin&rpar   32 32 32     32     32 32      32 30 thirty 30
Rotating pace of Rear Rotor &lparr&solmin&rpar   24&period5 23&period5 twenty five     26     26 26       26 24&period5 24&period5 25&period4
Driving Motor Energy &lparKW&rpar  5&period5 eleven eighteen&period5     37     fifty five seventy five       a hundred and ten 185 220 280
Tilting Motor Electricity &lparKW&rpar  0&period55 one&period1 1&period1    1&period5     2&period2 two&period2       4 five&period5 11 eleven
Tilting Angle   140° 140° 140°     140°      140° 140°         140° 140° 135° 135°
Strain of Compressed Air &lparMpa&rpar   &period5-&period8 &period6-&period8 &period5-&period8    &period6-&period8     &period6-&period8 &period6-&period8         &period6-&period8 &period6-&period8 &period6-&period8 &period6-&period8
Force of Cooling H2o &lparMpa&rpar  0&period2-&period4 &period2-&period4 &period2-&period4     &period2-&period4     &period3-&period4 &period3-&period4          &period3-&period4 &period3-&period4 &period3-&period4 &period3-&period4
Use of Compressed Air &lparm³&solmin&rpar  &geq0&period3 &geq0&period5 &geq0&period5     &geq0&period7    &geq0&period9 &geq1&period0        &geq1&period2 &geq1&period5 &geq2&period0 &geq4&period0
Strain of Heating Steam     &lparMpa&rpar  0&period5-&period8 &period5-&period8 &period5-&period8      &period5-&period8     &period5-&period8 &period5-&period8         &period5-&period8 &period5-&period8 &period5-&period8 &period5-&period8
Dimension &lparL×W×H&rpar  &lparmm&rpar  1660×960×1750 1850×1200×2580  2300×1360×2120  2500×1750×2450  3150×2571×2960  3370×1950×3571  3770×2570×3160   4060×2750×3590 4250X2750X4106 4250X3400X4215
Gross Bodyweight
&lpartons&rpar
2 two&period1 three&period3 4 6&period3 7&period1 9&period5 fourteen&period9 19&period5 22&period5

The use of unique equipment manufacturer’s (OEM) portion numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the shown replacement elements contained herein are not sponsored, approved, or made by the OEM.

Rubber factory made in China  replacement parts  in Juiz De Fora Brazil Internal Mixer N 75L) , Internal Mixer with top quality

Rubber factory made in China  replacement parts  in Juiz De Fora Brazil Internal Mixer N 75L) , Internal Mixer with top quality

Tags:

universal coupling

As one of leading universal coupling manufacturers, suppliers and exporters of products, We offer universal coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of universal coupling

Recent Posts