China Best Sales Wide Range Universal Coupling for Different Materials and of Various Outside Diameters universal coupling

Product Description

Universal coupling
Enables the mechanical jointing of pipes made of different materials and of various outside diameters

Description
Wide outside diameter range: an average of 29 mm.

High performance
– Permanent leak tight joint when compressing the gasket between the end ring and the sleeve CHINAMFG the pipe surface
– Epoxy powder coating (250 μm) and Geomet 500 Gr. B for the bolts.

Ease and speed of installation:
– Angular deflection ± 5° by side.
– Absorbs expansion and contraction.
– Accommodates misalignment.
– Important setting gap.

Conformity to standards
– EN 14525 : Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fiber-cement.
– NF A 48-830: Foundry products – Spheroidal graphite cast iron fittings for PVC drinking water pipes under pressure,
– EN 545: Ductile iron pipes, fittings, accessories and their joints for water pipelines 
– requirements and test methods,
– ISO 2531: Ductile iron pipes, fittings, and accessories and their joints for water applications.

Approval:- Drinking water approved (WRAS).

Note:
– This coupling does not resist to longitudinal forces and pipe pullout will occur. Ensure adequate restraint is provided.
– Not recommended for PE pipes.

Technical data
Range: DN 40 to 600.(Higher DN, please consult uUniversal coupling
Enables the mechanical jointing of pipes made of different materials and of various outside diameters

Description
Wide outside diameter range: an average of 29 mm.

High performance
– Permanent leak tight joint when compressing the gasket between the end ring and the sleeve CHINAMFG the pipe surface
– Epoxy powder coating (250 μm) and Geomet 500 Gr. B for the bolts.

Ease and speed of installation:
– Angular deflection ± 5° by side.
– Absorbs expansion and contraction.
– Accommodates misalignment.
– Important setting gap.

Conformity to standards
– EN 14525 : Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fiber-cement.
– NF A 48-830: Foundry products – Spheroidal graphite cast iron fittings for PVC drinking water pipes under pressure,
– EN 545: Ductile iron pipes, fittings, accessories and their joints for water pipelines 
– requirements and test methods,
– ISO 2531: Ductile iron pipes, fittings, and accessories and their joints for water applications.

Approval:- Drinking water approved (WRAS).

Note:
– This coupling does not resist to longitudinal forces and pipe pullout will occur. Ensure adequate restraint is provided.
– Not recommended for PE pipes.

Technical data
Range: DN 40 to 600.(Higher DN, please consult us)
Max. working pressure: PN 16
Temperatures: from
 
 

2. How soon can I get a price quote?
Once we know the Size, material, drive method we can provide you with 1 competitive price quote within 24 hours.

3. Can I get a sample?
Yes, the samples are free for you. But you need to offer 1 courier account NO. to afford the fee for samples shipping. The samples’ sending usually takes 5-7days.

4. How can my order produced by my brand?
Yes, you can. Pls offer your brand or LOGO design to us(.AI or.PSD format), then we could produce all goods with your brand or LOGO.

5. What’s your delivery time?
Except our legal holiday, it will take 2-4 weeks for us to finish all your orders’ production.

6. Is there a minimum order requirement?
Due to the high machine setup cost and shipping freight, our minimum order quantity is 5pcs

7. Do you have butterfly valve related accessories?
Yes, we have. We have accessories: pneumatic actuators, electric actuators, limit switches, solenoid valves, etc.

8. Will you match competitors’ prices?
If you find a lower price elsewhere for the exact same specification, we will meet or beat that price as long as it is a little higher than our cost price.

9. What are your terms of delivery?
We accept FOB, CIF etc. You can choose the 1 which is the most convenient or cost effective for you.

10. Where can I meet you by face to face?
A,Our headquarter is located in ZheJiang , if you travel to ZheJiang , you can visit our office at any time, we could pick you up from your location in ZheJiang and ZheJiang .
B,Our factories are located in ZheJiang and HangZhou, welcome to visit our factory before you cooperate with us.
C,We will attend China Spring Canton Fair and China Autumn Canton Fair every year, welcome to visit our booth at that time.

11. How can I be your sole agent in our country?
Welcome you to become our sole agent firstly. According to different countries’ demand, if your yearly purchase quantity from us can reach 10000 to 30000 pcs you could be our sole agent in your country. If you wanna know exact quantity requirement for each country, pls feel free to contact us at any time.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

universal coupling

How to Install and Align a Universal Coupling in a Mechanical Assembly

Proper installation and alignment of a universal coupling are crucial for its efficient and reliable operation. Here are the steps to install and align a universal coupling in a mechanical assembly:

  1. Prepare the Coupling Components: Ensure that all the universal coupling components are clean and free from any dirt, debris, or damage. Verify that the shafts to be connected are appropriately sized and compatible with the coupling.
  2. Inspect the Coupling: Check the universal coupling’s spider or cross assembly for any signs of wear, cracks, or damage. Replace the spider if it shows any signs of deterioration.
  3. Align the Shafts: Position the two shafts that need to be connected to the universal coupling. Align the shafts as closely as possible, aiming for minimum misalignment. Ensure that the shafts are parallel and that the angular misalignment is within the coupling’s specified tolerance.
  4. Insert the Spider: Carefully insert the spider or cross assembly into the forks of the universal coupling. Make sure the spider is properly seated and fits securely in both forks.
  5. Secure the Coupling: Depending on the type of universal coupling, secure the forks onto the shafts using set screws, bolts, or clamps. Follow the manufacturer’s guidelines for the specific coupling model.
  6. Check for Free Movement: After securing the coupling, check that the spider allows for free movement of the shafts within the specified angular and axial limits. The shafts should rotate smoothly without any binding or interference.
  7. Perform a Trial Run: Before finalizing the installation, perform a trial run to ensure that the coupling operates smoothly and without any unusual vibrations or noises.
  8. Make Final Adjustments: If necessary, make minor adjustments to the alignment or coupling position to optimize the performance. Recheck the shaft alignment and ensure that it meets the required specifications.
  9. Tighten Fasteners: Once the alignment is satisfactory, tighten all the fasteners securely to prevent any movement or slippage during operation.
  10. Perform Regular Maintenance: Schedule regular inspections and maintenance for the universal coupling to ensure its continued performance and reliability. Lubricate the coupling as per the manufacturer’s recommendations to reduce wear and friction.

Remember that accurate alignment of the universal coupling will minimize stress on the shafts and extend the lifespan of the coupling and connected components. If you are unsure about the installation process or the coupling’s compatibility with your system, consult the manufacturer or a qualified engineer for guidance.

universal coupling

How do Temperature and Environmental Conditions Affect Universal Coupling Performance?

Temperature and environmental conditions can have a significant impact on the performance of universal couplings in mechanical systems. The materials used in manufacturing the coupling and the operating conditions can influence its durability, flexibility, and overall functionality.

Temperature: Universal couplings are often made from materials such as steel, stainless steel, or aluminum, which have specific temperature ranges they can withstand. Extreme temperatures, whether hot or cold, can affect the mechanical properties of the coupling material. High temperatures may lead to thermal expansion, which can affect the coupling’s fit and alignment. On the other hand, extremely low temperatures can cause the material to become brittle, reducing its flexibility and impact resistance. It is crucial to choose a universal coupling that is suitable for the anticipated temperature range in the application to ensure reliable performance.

Environmental Conditions: Universal couplings used in harsh environments, such as those exposed to moisture, chemicals, dust, or abrasive particles, need to be made from corrosion-resistant and durable materials. Corrosion can degrade the coupling over time, leading to reduced performance and potential failure. Additionally, environmental contaminants can affect the smooth operation of the coupling and cause premature wear. Proper sealing and protective coatings can enhance the coupling’s resistance to environmental factors.

Dynamic Operating Conditions: Some applications may subject the universal coupling to dynamic loads, shocks, or high-speed rotations. In such cases, the coupling’s fatigue strength and torsional stiffness become critical factors. High dynamic loads and shock forces can lead to stress concentration and fatigue failure in the coupling if it is not appropriately designed for such conditions.

Alignment Maintenance: Temperature variations and environmental conditions can cause changes in the alignment of the connected shafts. It is essential to regularly inspect and maintain the alignment of the coupling to prevent excessive wear and ensure optimal performance.

Overall, selecting a universal coupling that is designed to withstand the specific temperature and environmental conditions of the application is crucial for ensuring its longevity and reliable performance in mechanical systems.

universal coupling

What are the Different Types of Universal Couplings Available in the Market?

Universal couplings, also known as universal joints or U-joints, come in various designs to meet the specific needs of different applications. The main types of universal couplings available in the market include:

  • Single Universal Joint: This is the most common type of universal coupling and consists of two yokes connected by a cross-shaped intermediate component. It allows for angular misalignment between the two shafts.
  • Double Universal Joint: Also known as a double Cardan joint, this type of coupling uses two single universal joints connected end-to-end with an intermediate shaft in between. It is used to minimize the angular variation between the input and output shafts, reducing vibration in certain applications.
  • Constant Velocity Joint (CV Joint): A CV joint is a specialized type of universal joint that maintains a constant velocity ratio between the input and output shafts. It is commonly used in automotive drive shafts to provide smooth power transmission even at varying angles.
  • Disc Coupling: A disc coupling, also known as a diaphragm coupling, is a type of universal coupling that uses a series of flexible metal discs to transmit torque between the shafts. It provides high torsional stiffness and can accommodate misalignment in multiple directions.
  • Flex Joint Coupling: The flex joint coupling is designed to handle large angular misalignments and axial movements. It is commonly used in applications with significant shaft misalignment and torsional flexibility requirements.

The choice of universal coupling type depends on factors such as the required range of motion, misalignment angles, torque capacity, and application-specific requirements. Engineers and designers select the appropriate coupling type based on the specific needs of the mechanical system to ensure reliable and efficient power transmission while accommodating shaft misalignment and angular variation.

China Best Sales Wide Range Universal Coupling for Different Materials and of Various Outside Diameters  universal couplingChina Best Sales Wide Range Universal Coupling for Different Materials and of Various Outside Diameters  universal coupling
editor by CX 2024-05-15

universal coupling

As one of leading universal coupling manufacturers, suppliers and exporters of products, We offer universal coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of universal coupling

Recent Posts