Product Description
Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling
Product Description
Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.
Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc
Coupling performance
1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CHINAMFG requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.
How to select the appropriate coupling type
The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.
If you cannot determine the type, you can contact our professional engineer
Related products
Company Profile
Our Equipments
Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.
Machining equipments
Heat equipment
Our Factory
Application – Photos from our partner customers
Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Are there Maintenance Requirements for Universal Couplings to Ensure Longevity?
Yes, like any mechanical component, universal couplings require regular maintenance to ensure longevity and optimal performance. Proper maintenance practices can help prevent premature wear, reduce the risk of failure, and extend the service life of the coupling. Here are some essential maintenance requirements for universal couplings:
- Lubrication: Universal couplings consist of moving parts, such as bearings and cross journals, which require proper lubrication. Regularly lubricating the coupling helps reduce friction, wear, and heat generation. The type and amount of lubrication needed depend on the coupling’s design and the manufacturer’s recommendations.
- Inspection: Regular visual inspections should be performed to check for signs of wear, damage, or misalignment. Look for any abnormal vibrations, noise, or leakage. If any issues are detected, they should be addressed promptly to prevent further damage.
- Torque Checks: It is essential to periodically check the torque of the coupling’s fasteners, such as bolts and nuts, to ensure they are properly tightened. Loose fasteners can lead to misalignment and coupling failure.
- Alignment: If the coupling is used in an application where misalignment is common, such as automotive drivetrains, it is crucial to check and adjust the alignment regularly. Proper alignment helps prevent excessive stress on the coupling and other connected components.
- Replacement of Worn Parts: Over time, certain parts of the universal coupling, such as bearings and seals, may wear out and need replacement. Following the manufacturer’s recommended service intervals and using genuine replacement parts is essential to maintain the coupling’s reliability.
It is essential to refer to the manufacturer’s maintenance guidelines and recommendations specific to the universal coupling model and application. Regular maintenance not only ensures the longevity of the coupling but also contributes to the overall efficiency and reliability of the machinery or system in which it is used.
How do you select the right half coupling material based on the fluid or gas being conveyed?
When choosing the right half coupling material for a specific fluid or gas conveyance application, several factors need to be considered. The material selection is critical to ensure compatibility with the conveyed substance, prevent corrosion, and maintain the overall integrity of the coupling. Here are the steps to help select the appropriate half coupling material:
1. Identify the Conveyed Fluid or Gas: Determine the type of fluid or gas that will flow through the system. Consider factors such as the chemical composition, temperature, pressure, and whether it is corrosive or abrasive.
2. Check Material Compatibility: Ensure that the material of the half coupling is compatible with the conveyed substance. Some fluids or gases may react with certain materials, leading to corrosion or contamination. For example, corrosive chemicals may require corrosion-resistant materials such as stainless steel.
3. Consider Temperature and Pressure: High temperatures and pressures can affect the mechanical properties of the coupling material. Ensure that the selected material can withstand the operating conditions without compromising its structural integrity.
4. Corrosion Resistance: If the conveyed substance is corrosive, select a material that offers high corrosion resistance. Stainless steel, for instance, is known for its excellent corrosion resistance properties.
5. Abrasion Resistance: For applications involving abrasive fluids or gases, choose a material that can withstand wear and erosion. Hardened materials or those with protective coatings may be suitable.
6. Compliance with Standards: Consider whether there are specific industry standards or regulations that dictate the choice of material for certain applications. Ensure that the selected material meets these standards, especially in critical industries like food, pharmaceuticals, or petrochemicals.
7. Budget and Availability: Take into account the cost of the material and its availability. Some specialized materials may be more expensive or harder to obtain, so it’s essential to balance performance requirements with budget constraints.
8. Seek Expert Advice: If unsure about the best material choice, consult with coupling manufacturers or industry experts who can provide guidance based on the specific application requirements.
By carefully considering the conveyed fluid or gas, the operating conditions, and the material properties, it is possible to select the right half coupling material that ensures reliable and safe conveyance in the system.
How does a Universal Coupling Work to Transmit Torque and Rotation?
A universal coupling, also known as a universal joint or U-joint, is a mechanical device used to transmit torque and rotation between two shafts that are not in a straight line and have angular misalignment. It allows for flexible coupling between the shafts, enabling power transmission even when they are at different angles to each other.
The basic design of a single universal joint consists of two yokes, each attached to the end of the shafts to be connected. The yokes are connected by a cross-shaped intermediate component, often referred to as the spider or cross. The spider has four arms, each fitting into a yoke, creating a flexible joint.
When one shaft rotates, the spider transmits the motion to the other yoke and, consequently, to the second shaft. This mechanism allows the universal coupling to handle angular misalignment between the shafts. The universal joint can accommodate small angles of misalignment, making it ideal for applications where the shafts are not perfectly aligned.
The double universal joint, also known as the double Cardan joint, consists of two single universal joints connected end-to-end with an intermediate shaft in between. This design reduces the angular variation between the input and output shafts, providing a smoother rotation and reducing vibration in certain applications.
The constant velocity joint (CV joint) is a specialized type of universal joint that maintains a constant velocity ratio between the input and output shafts. It is commonly used in automotive drive shafts to provide smooth power transmission, especially in front-wheel-drive vehicles, where the drive shafts must adjust to changing angles as the wheels turn.
Overall, universal couplings are essential components in various mechanical systems, especially in vehicles, industrial machinery, and power transmission applications. They allow for flexible power transmission while compensating for misalignment, making them a versatile and widely used coupling solution.
editor by CX 2024-01-10