Product Description
Universal coupling
Enables the mechanical jointing of pipes made of different materials and of various outside diameters
Description
Wide outside diameter range: an average of 29 mm.
High performance
– Permanent leak tight joint when compressing the gasket between the end ring and the sleeve CHINAMFG the pipe surface
– Epoxy powder coating (250 μm) and Geomet 500 Gr. B for the bolts.
Ease and speed of installation:
– Angular deflection ± 5° by side.
– Absorbs expansion and contraction.
– Accommodates misalignment.
– Important setting gap.
Conformity to standards
– EN 14525 : Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fiber-cement.
– NF A 48-830: Foundry products – Spheroidal graphite cast iron fittings for PVC drinking water pipes under pressure,
– EN 545: Ductile iron pipes, fittings, accessories and their joints for water pipelines
– requirements and test methods,
– ISO 2531: Ductile iron pipes, fittings, and accessories and their joints for water applications.
Approval:- Drinking water approved (WRAS).
Note:
– This coupling does not resist to longitudinal forces and pipe pullout will occur. Ensure adequate restraint is provided.
– Not recommended for PE pipes.
Technical data
Range: DN 40 to 600.(Higher DN, please consult uUniversal coupling
Enables the mechanical jointing of pipes made of different materials and of various outside diameters
Description
Wide outside diameter range: an average of 29 mm.
High performance
– Permanent leak tight joint when compressing the gasket between the end ring and the sleeve CHINAMFG the pipe surface
– Epoxy powder coating (250 μm) and Geomet 500 Gr. B for the bolts.
Ease and speed of installation:
– Angular deflection ± 5° by side.
– Absorbs expansion and contraction.
– Accommodates misalignment.
– Important setting gap.
Conformity to standards
– EN 14525 : Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fiber-cement.
– NF A 48-830: Foundry products – Spheroidal graphite cast iron fittings for PVC drinking water pipes under pressure,
– EN 545: Ductile iron pipes, fittings, accessories and their joints for water pipelines
– requirements and test methods,
– ISO 2531: Ductile iron pipes, fittings, and accessories and their joints for water applications.
Approval:- Drinking water approved (WRAS).
Note:
– This coupling does not resist to longitudinal forces and pipe pullout will occur. Ensure adequate restraint is provided.
– Not recommended for PE pipes.
Technical data
Range: DN 40 to 600.(Higher DN, please consult us)
Max. working pressure: PN 16
Temperatures: from
2. How soon can I get a price quote?
Once we know the Size, material, drive method we can provide you with 1 competitive price quote within 24 hours.
3. Can I get a sample?
Yes, the samples are free for you. But you need to offer 1 courier account NO. to afford the fee for samples shipping. The samples’ sending usually takes 5-7days.
4. How can my order produced by my brand?
Yes, you can. Pls offer your brand or LOGO design to us(.AI or.PSD format), then we could produce all goods with your brand or LOGO.
5. What’s your delivery time?
Except our legal holiday, it will take 2-4 weeks for us to finish all your orders’ production.
6. Is there a minimum order requirement?
Due to the high machine setup cost and shipping freight, our minimum order quantity is 5pcs
7. Do you have butterfly valve related accessories?
Yes, we have. We have accessories: pneumatic actuators, electric actuators, limit switches, solenoid valves, etc.
8. Will you match competitors’ prices?
If you find a lower price elsewhere for the exact same specification, we will meet or beat that price as long as it is a little higher than our cost price.
9. What are your terms of delivery?
We accept FOB, CIF etc. You can choose the 1 which is the most convenient or cost effective for you.
10. Where can I meet you by face to face?
A,Our headquarter is located in ZheJiang , if you travel to ZheJiang , you can visit our office at any time, we could pick you up from your location in ZheJiang and ZheJiang .
B,Our factories are located in ZheJiang and HangZhou, welcome to visit our factory before you cooperate with us.
C,We will attend China Spring Canton Fair and China Autumn Canton Fair every year, welcome to visit our booth at that time.
11. How can I be your sole agent in our country?
Welcome you to become our sole agent firstly. According to different countries’ demand, if your yearly purchase quantity from us can reach 10000 to 30000 pcs you could be our sole agent in your country. If you wanna know exact quantity requirement for each country, pls feel free to contact us at any time.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
What are the Common Materials Used in Manufacturing Universal Couplings?
Universal couplings are commonly manufactured using a variety of materials, each chosen based on its mechanical properties, durability, and compatibility with the application. Some of the common materials used in manufacturing universal couplings include:
- Steel: Steel is one of the most widely used materials for universal couplings. It offers excellent strength, durability, and resistance to wear. Carbon steel and alloy steel are commonly used for general-purpose universal couplings.
- Stainless Steel: Stainless steel is chosen for its corrosion resistance and ability to withstand harsh environmental conditions. It is commonly used in applications where the coupling may be exposed to moisture, chemicals, or high temperatures.
- Aluminum: Aluminum is lightweight and has good corrosion resistance. It is often used in applications where weight reduction is essential, such as in the automotive and aerospace industries.
- Cast Iron: Cast iron is known for its high strength and wear resistance. It is commonly used for heavy-duty applications and situations where shock loads may be present.
- Bronze: Bronze is a material chosen for its self-lubricating properties. It is commonly used in applications where lubrication may be limited or difficult.
- Plastics: Some universal couplings use high-strength plastics, such as polyurethane or nylon, for specific applications where non-metallic materials are preferred due to factors like electrical insulation or chemical resistance.
The choice of material depends on factors such as the application’s operating conditions, load requirements, temperature range, and potential exposure to corrosive or abrasive substances. Manufacturers select the appropriate material to ensure that the universal coupling performs reliably and efficiently in its intended environment.
What are some real-world examples of half coupling usage in different industries?
Half couplings are widely used in various industries to create secure connections between pipes and other components. Here are some real-world examples of half coupling usage:
1. Oil and Gas Industry: In the oil and gas industry, half couplings are used to connect pipes, valves, and fittings in pipelines, refineries, and offshore platforms. They facilitate easy installation and maintenance of piping systems, allowing for efficient flow of oil and gas.
2. Chemical Industry: Chemical processing plants use half couplings to connect pipes that transport different chemicals and substances. These couplings are often made from corrosion-resistant materials to withstand the harsh chemical environments.
3. Water Treatment Plants: Half couplings play a vital role in water treatment plants, connecting pipes that carry treated water, wastewater, and chemicals. They are essential for maintaining a reliable and leak-free water distribution system.
4. Power Generation: Power plants, including thermal, nuclear, and renewable energy facilities, utilize half couplings to connect pipes carrying steam, water, and cooling fluids. These couplings are designed to handle high temperatures and pressures.
5. Construction and Infrastructure: In construction projects, half couplings are used to join pipes for plumbing, HVAC systems, and fire protection. They are also used in infrastructure projects like bridges and tunnels.
6. Food and Beverage Industry: Food processing plants use half couplings to connect pipes carrying liquids and beverages. Stainless steel half couplings are commonly used to maintain hygiene and prevent contamination.
7. Marine and Shipbuilding: Half couplings are employed in marine applications for connecting pipes, pumps, and fittings on ships and offshore platforms. They are designed to withstand the corrosive nature of seawater.
8. Pulp and Paper Industry: Pulp and paper mills use half couplings in their processing lines to connect pipes carrying pulp, chemicals, and water. These couplings are designed to handle abrasive materials.
9. Mining and Minerals Processing: In mining operations, half couplings are used to connect pipes that transport minerals, slurry, and wastewater. They are designed for durability and resistance to abrasive materials.
10. Aerospace and Aviation: In aerospace applications, half couplings are used in fuel and hydraulic systems to ensure reliable fluid flow and connections.
These are just a few examples of the diverse applications of half couplings across different industries. Their versatility, ease of use, and ability to create leak-proof connections make them a preferred choice in many piping systems.
Can Universal Couplings Accommodate Misalignment in Shafts and Drives?
Yes, universal couplings are specifically designed to accommodate misalignment between shafts and drives. The unique design of universal couplings allows them to transmit torque and rotation between two shafts that are not in perfect alignment with each other. There are two primary types of misalignment that universal couplings can handle:
- Angular Misalignment: Universal couplings can handle angular misalignment, which occurs when the shafts are not in line with each other and form an angle. The design of the universal joint allows it to bend and flex at different angles, allowing the shafts to stay connected and transmit torque even when they are not perfectly aligned.
- Parallel Misalignment: Universal couplings can also handle parallel misalignment, which occurs when the two shafts are not perfectly parallel to each other. The flexible nature of the universal joint allows it to compensate for small variations in parallel alignment, ensuring that the shafts remain connected and transmit power efficiently.
By accommodating misalignment, universal couplings help to reduce stress on the shafts and other connected components, thus preventing premature wear and failure. They are commonly used in various applications, including automotive drivetrains, industrial machinery, marine propulsion systems, and aerospace equipment, where misalignment is inevitable due to the dynamic nature of the systems.
editor by CX 2024-04-29